Activity

If you have set up windows within your house, then you may have to deal with many issues. So, to make things easy for you, we have compiled some ideas related to repairs. Certainly, once you go through various procedures, you won’t have to think about seeking help from experts.

1. How to repair sash windows

As seasons pass by, sash windows might fail to function properly. So, if it becomes difficult to open the casement, then the first step should be to remove the stash. Later, you should check the condition of hinges and lubricate them by using a spray. Finally, you should consider replacing old parts and find the appropriate ones at the hardware store. Soon after you have applied the primer, you must remember hang the sash once again.

2. How to mend a window that rattles

If you are living near an airport, then you might probably be distracted by a rattling sound as the windows start vibrating. So, the best solution would be to stabilize the glass through weather-stripping. Once you have cleaned the area with soap and water, you should measure the window and thereby apply pieces of weather stripping. Such a type of trick would prevent air leakages around the edges and gaps.

3. How to fix a transom window

In case the frame is not integrated with the glass pane, you should initially remove the glazing around the broken surface. In order to keep pieces together, try covering the pane with a tape. Eventually, you need to replace the glass and place an order only when you have accurately measured its dimensions. Once the pane is put back in its place, you should re-glaze the window all by yourself.

4. How to repair an awning window

When something goes wrong with an awning window, you should check the hinges and inspect screws to identify the problem. Remove the screen from the window and disengage the operating arms. Later, you should order new parts, install them and test to ensure that the window is functioning properly. If problems persist, then you must wipe off dirt accumulated in the joints with the help of a damp cloth.

5. How to repair a rusted wooden frame

When you need to deal with a rusted wooden frame, you should first brush away the rust or use a drill. Next, you should proceed in wiping the surface with a rag and polish wood with silicon carbide sandpaper. After a few minutes, apply epoxy filler and sand the flush along with the existing surface. Just make sure you a coarse-grit sandpaper and continue working with an extra fine sandpaper.

6. How to repair a rotten window sill

It’s unfortunate to discover a window sill when the wood rots after a period of time. So, you must start off by measuring the length, thickness and width of the frame. Next,

reparacion persianas barcelona must use a pry bar to remove the trim on the sash channels. Moving ahead, you should pull out the nails and cut the window sill according to the dimensions. When it’s time to fit the new sill, you should remember to fit the trim in the reverse order, polish the wood and wipe off sawdust with a dry cloth.

7. How to fix a loose sash window

Although windows might get completely stuck, loose sash can be tightened to a better extent. If the gap is too wide, then the stopper is adjusted without removing it from its position. You then have to secure the stopper with a wooden block and hammer along its length. As an alternative, you can always paste an insulation strip near the area.