Activity

As durable and reliable as they may be, home appliances occasionally break down and need repair. Here are the five most common issues appliance repair technicians encounter.

1. Stalled Washing Machine

Maybe you have gone to move a load from the washer into the dryer just to find it soaking into a sterile bath? Although the machine might have broken down at the midst of its cycle, the more likely explanation is really a busted lid or door change. Because your washer relies on a door sensor to ensure that its lid is closed, it may stop running if there’s an issue with the switch. Typically, the switch is ruined by rough use, such as hammering the lid after dropping in a load.

The Fix: Have a service technician replace the door switch.

2. Cold Dryer

As you’re undoubtedly aware, clothes dryers use heat to remove moisture from wet clothes and accessories. If your dryer stops to carry out its main function, there is a fantastic chance the problem is really a blown thermal fuse. If this part rests, the dryer will not create any heat in any way.

The Fix: Replace the thermal fuse and inspect the cycling thermostat. If the heat returns, the machine needs to function as expected.

3. Leaky Freezer

Modern freezers occasionally complete defrost cycles to save homeowners the trouble of defrosting the whole device from time to time. During these cycles, then melted water goes into the drip pan via the defrost drain. However, if this canning drain is clogged with debris and food, water will start to flow out onto the lower shelves. In most instances, the melted water will freeze, forming a sheet of ice on the floor of the freezer.

The Fix: Possessing an appliance repair technician replace or clean the defrost drain.

4. Washer Won’t Wash

All top-load washing machines rely on a part called an agitator that is used to swish, swirl, and spin clothes through the full cycle. If this part will not proceed, the appliance cannot perform its function. In most instances, a stalled agitator will continue to make sound while it struggles to move. Because they frequently assume the problem cannot be repaired, many homeowners just replace their older washer with a one that is new. This is often a mistake, since the fix prices are generally just a fraction of the purchase price of a new unit.

The Repair: Have the engine coupling replaced.

5.

maytag appliance repair

When a dishwasher turns on but does not run, the problem often involves a part called a float switch. Used to control the quantity of water which enters the appliance, the part ensures normal functioning. But because it is accessible from inside the device, it’s possible for a fork, knife, or other object to jam the component, locking it in fixed position that prevents it from discharging the water needed to operate the machine.

The Fix: Nine times out of ten, a service technician can remove the object that’s jamming the float button without damaging the part.

A seasoned appliance repair technician may tackle some of the aforementioned difficulties.